Supplies
From CLARITY Wiki
Revision as of 20:18, 17 December 2013 by Kristin Engberg (Talk | contribs)
Contents |
Degassing supplies
American suppliers
Supply | Purpose/Description | Manufacturer (Part #) |
---|---|---|
Vacuum pump | Degassing oxygen from container before hydrogel polymerization | Buchi (V-700) |
Desiccation canister | Canister with two outlets for nitrogen/vacuum hook-up | McMaster-Carr (2204K7) |
Desiccation cartridge | Cartridge for canister to hold samples | McMaster-Carr (2204K71) |
Nitrogen tank | Replaces oxygen during degassing | any |
European suppliers
Supply | Purpose/Description | Manufacturer (Part #) |
---|---|---|
Vacuum pump | Degassing oxygen from container before hydrogel polymerization | |
Desiccation canister | Canister with two outlets for nitrogen/vacuum hook-up | |
Desiccation cartridge | Cartridge for canister to hold samples | |
Nitrogen tank | Replaces oxygen during degassing | any |
ETC set-up supplies
American suppliers
Supply | Purpose/Description | Manufacturer (Part #) |
---|---|---|
Temperature controlled water circulator | Circulates and heats/cools clearing solution during ETC | Lauda-Brinkmann (ECO RE 415S) |
Buffer filter | Filter and canister for collecting large particle contaminants from clearing solution | McMaster-Carr (4448K35) |
Replacement filter cartridge | Replacement filters for clearing solution filtration (replace every few ETC runs) | McMaster-Carr (4422K61) |
BioRad HC PowerPac system | Power supply for high-current applications, 100-120/220-240 V | Bio-Rad (164-5052) |
PowerPac system adaptor | 4 mm adaptor for converting non-IEC-certified cells to fit deeper output terminals of PowerPac power supplies | Bio-Rad (164-5064) |
Patch cord for banana plugs to alligator clips, 12" | Cord to connect power supply to Pt wire of the ETC chamber | McMaster-Carr (6927K42) |
European suppliers
Supply | Purpose/Description | Manufacturer (Part #) |
---|