Supply
|
Purpose/Description
|
Manufacturer (Part #)
|
Temperature controlled water circulator
|
Circulates and heats/cools clearing solution during ETC
|
Lauda-Brinkmann (ECO RE 415S)
|
Buffer filter
|
Filter and canister for collecting large particle contaminants from clearing solution
|
McMaster-Carr (4448K35)
|
Replacement filter cartridge
|
Replacement filters for clearing solution filtration (replace every few ETC runs)
|
McMaster-Carr (4422K61)
|
BioRad HC PowerPac system
|
Power supply for high-current applications, 100-120/220-240 V
|
Bio-Rad (164-5052)
|
PowerPac system adaptor
|
4 mm adaptor for converting non-IEC-certified cells to fit deeper output terminals of PowerPac power supplies
|
Bio-Rad (164-5064)
|
Patch cord for banana plugs to alligator clips, 12"
|
Cord to connect power supply to Pt wire of the ETC chamber
|
McMaster-Carr (6927K42)
|
Clear 1/4" tubing
|
Plastic tubing for connecting ETC components with barbed fittings
|
McMaster-Carr
|
Clear polyurethane tubing
|
Plastic tubing for connecting ETC components with push-to-connect fittings
|
McMaster-Carr (5648K71)
|
Chemical resistant polypropylene stopcock
|
Stopcock with barbed fittings for connecting 1/4" tubing
|
McMaster-Carr (48285K24)
|
Polypropylene push-to-connect ball valve
|
Push-to-connect tubing stopcock for 3/8" OD tubing (unrestricted flow)
|
McMaster-Carr (4379K62)
|
Single barbed tube fitting, 9/16" hex head for 1/4" tubing
|
Barbed fitting for connecting tubing to buffer filter
|
McMaster-Carr (5463K247)
|
Teflon tape
|
Wrap for sealing screwed fittings
|
McMaster-Carr (7562A17)
|
Supply
|
Purpose/Description
|
Manufacturer (Part #)
|
Temperature controlled water circulator
|
Circulates and heats/cools clearing solution during ETC
|
|
Buffer filter
|
Filter and canister for collecting large particle contaminants from clearing solution
|
|
Replacement filter cartridge
|
Replacement filters for clearing solution filtration (replace every few ETC runs)
|
|
BioRad HC PowerPac system
|
Power supply for high-current applications, 100-120/220-240 V
|
|
PowerPac system adaptor
|
4 mm adaptor for converting non-IEC-certified cells to fit deeper output terminals of PowerPac power supplies
|
|
Patch cord for banana plugs to alligator clips, 12"
|
Cord to connect power supply to Pt wire of the ETC chamber
|
|
Clear 1/4" tubing
|
Plastic tubing for connecting ETC components with barbed fittings
|
|
Clear polyurethane tubing
|
Plastic tubing for connecting ETC components with push-to-connect fittings
|
|
Chemical resistant polypropylene stopcock
|
Stopcock with barbed fittings for connecting 1/4" tubing
|
|
Polypropylene push-to-connect ball valve
|
Push-to-connect tubing stopcock for 3/8" OD tubing (unrestricted flow)
|
|
Single barbed tube fitting, 9/16" hex head for 1/4" tubing
|
Barbed fitting for connecting tubing to buffer filter
|
|
Teflon tape
|
Wrap for sealing screwed fittings
|
|
Supply
|
Purpose/Description
|
Manufacturer (Part #)
|
Plastic chamber, 60 mL
|
ETC container
|
Nalgene (2118-0002)
|
Platinum wire, 0.5 mm diameter, 40-50 cm
|
Wire for ETC electrodes
|
Sigma Aldrich (267201-2G)
|
Single barbed tube fitting, 7/16" hex head for 1/4" tubing
|
Barbed fitting for chamber inlet and outlet
|
McMaster-Carr (5463K245)
|
Polypropylene push-to-connect tube fitting for 3/8" OD, 1/4 pipe size
|
Push-to-connect fitting for chamber inlet and outlet
|
McMaster-Carr (9087K13)
|
Tube to tube coupling for 3/32" x 1/16" tubing
|
Electrode portal for connection to power supply
|
McMaster-Carr (5117K51)
|
3M Duo Adhesive dispenser
|
Epoxy adhesive dispenser
|
McMaster-Carr (7467A43)
|
3M Duo Adhesive cartridges
|
50 mL epoxy adhesive cartridges
|
McMaster-Carr (7467A17)
|
3M Duo Adhesive mixing applicators
|
Cartridge tip to mix duo adhesive prior to application
|
McMaster-Carr (7467A12)
|
Cell strainer
|
Tissue sample holder inside chamber
|
BD Falcon (352340)
|
Polyethylene mesh sleeve, 1/4"-1" diameter
|
Mesh to place around tissue sample within holder to prevent sample movement/tumbling
|
McMaster-Carr (5969K21/5969K22)
|
Chemical resistant polypropylene mesh, 6x6, 0.1323" opening
|
Mesh to place between sample holder and electrodes
|
McMaster-Carr (9275T38)
|
Electronic pliers
|
Pliers for shaping Pt wires into electrodes
|
Xcelite (378M)
|
Aluminum foil tape
|
Tape for lightproofing sample chamber
|
E&K Scientific (T592100)
|