| Supply
|
Purpose/Description
|
Manufacturer (Part #)
|
| Temperature controlled water circulator
|
Circulates and heats/cools clearing solution during ETC
|
Lauda-Brinkmann (ECO RE 415S)
|
| Buffer filter
|
Filter and canister for collecting large particle contaminants from clearing solution
|
McMaster-Carr (4448K35)
|
| Replacement filter cartridge
|
Replacement filters for clearing solution filtration (replace every few ETC runs)
|
McMaster-Carr (4422K61)
|
| BioRad HC PowerPac system
|
Power supply for high-current applications, 100-120/220-240 V
|
Bio-Rad (164-5052)
|
| PowerPac system adaptor
|
4 mm adaptor for converting non-IEC-certified cells to fit deeper output terminals of PowerPac power supplies
|
Bio-Rad (164-5064)
|
| Patch cord for banana plugs to alligator clips, 12"
|
Cord to connect power supply to Pt wire of the ETC chamber
|
McMaster-Carr (6927K42)
|
| Clear 1/4" tubing
|
Plastic tubing for connecting ETC components with barbed fittings
|
McMaster-Carr
|
| Clear polyurethane tubing
|
Plastic tubing for connecting ETC components with push-to-connect fittings
|
McMaster-Carr (5648K71)
|
| Chemical resistant polypropylene stopcock
|
Stopcock with barbed fittings for connecting 1/4" tubing
|
McMaster-Carr (48285K24)
|
| Polypropylene push-to-connect ball valve
|
Push-to-connect tubing stopcock for 3/8" OD tubing (unrestricted flow)
|
McMaster-Carr (4379K62)
|
| Single barbed tube fitting, 9/16" hex head for 1/4" tubing
|
Barbed fitting for connecting tubing to buffer filter
|
McMaster-Carr (5463K247)
|
| Teflon tape
|
Wrap for sealing screwed fittings
|
McMaster-Carr (7562A17)
|
| Supply
|
Purpose/Description
|
Manufacturer (Part #)
|
| Temperature controlled water circulator
|
Circulates and heats/cools clearing solution during ETC
|
|
| Buffer filter
|
Filter and canister for collecting large particle contaminants from clearing solution
|
|
| Replacement filter cartridge
|
Replacement filters for clearing solution filtration (replace every few ETC runs)
|
|
| BioRad HC PowerPac system
|
Power supply for high-current applications, 100-120/220-240 V
|
|
| PowerPac system adaptor
|
4 mm adaptor for converting non-IEC-certified cells to fit deeper output terminals of PowerPac power supplies
|
|
| Patch cord for banana plugs to alligator clips, 12"
|
Cord to connect power supply to Pt wire of the ETC chamber
|
|
| Clear 1/4" tubing
|
Plastic tubing for connecting ETC components with barbed fittings
|
|
| Clear polyurethane tubing
|
Plastic tubing for connecting ETC components with push-to-connect fittings
|
|
| Chemical resistant polypropylene stopcock
|
Stopcock with barbed fittings for connecting 1/4" tubing
|
|
| Polypropylene push-to-connect ball valve
|
Push-to-connect tubing stopcock for 3/8" OD tubing (unrestricted flow)
|
|
| Single barbed tube fitting, 9/16" hex head for 1/4" tubing
|
Barbed fitting for connecting tubing to buffer filter
|
|
| Teflon tape
|
Wrap for sealing screwed fittings
|
|
| Supply
|
Purpose/Description
|
Manufacturer (Part #)
|
| Plastic chamber, 60 mL
|
ETC container
|
Nalgene (2118-0002)
|
| Platinum wire, 0.5 mm diameter, 40-50 cm
|
Wire for ETC electrodes
|
Sigma Aldrich (267201-2G)
|
| Single barbed tube fitting, 7/16" hex head for 1/4" tubing
|
Barbed fitting for chamber inlet and outlet
|
McMaster-Carr (5463K245)
|
| Polypropylene push-to-connect tube fitting for 3/8" OD, 1/4 pipe size
|
Push-to-connect fitting for chamber inlet and outlet
|
McMaster-Carr (9087K13)
|
| Tube to tube coupling for 3/32" x 1/16" tubing
|
|