Chamber Construction

From CLARITY Wiki

Revision as of 08:08, 3 December 2013 by Kristin Engberg (Talk | contribs)

Jump to: navigation, search

Contents

Chamber construction procedure

Mark the plastic container

Marked chamber.jpg

Screw down the cap of a 60 mL Nalgene container tightly. While tightly shut, mark the areas to be soldered for the inlet and outlet fittings, making sure that they are on the same plane and on opposite sides of the container.

Alternative fittings

  • Push-to-connect fittings for better leakage control
  • Banana plug fittings for electrodes to prevent platinum wire breakage from alligator clips

Alternative chambers

  • 3-D printed
  • 3-D ceramic
  • 125 mL Nalgene for larger tissues